RC 246 - Clinical Practice IV

General Objectives

• demonstrate an understanding of the role of the respiratory therapist in the clinical setting;
• demonstrate good working relations in functioning as a member of the health care team;
• demonstrate professional behavior and judgment in terms of appearance, attitudes and conduct with staff and patients;
• demonstrate professional responsibility in terms of attendance and punctuality;
• demonstrate effective communication skills in dealing with staff and patients;
• demonstrate good patient care skills and rapport in establishing and maintaining therapeutic relationships with patients;
• describe the structure and function of a respiratory care department;
• describe the organization of patient care areas and function of equipment observed; and
• follow infection control guidelines as outlined in our professional clinical guidelines as well as hospital regulations.

The student will be expected to demonstrate continued competence in all Clinical Practice I, II, and III objectives:

Performance and Knowledge Objectives for Clinical Practice I:

• demonstrate appropriate use of compressed gas cylinders including air, oxygen, heliox, nitric oxide, and any other medical gases used as a therapy;
• demonstrate appropriate use of oxygen delivery devices including air/oxygen blenders, regulators and flowmeters, masks, cannulas, and enclosures;
• demonstrate appropriate use of liquid oxygen systems;
• demonstrate appropriate use of oxygen delivery during patient transport;
• demonstrate an understanding of basic assessment for need of oxygen or other medically therapeutic gas;
• demonstrate an understanding for the need and appropriate use of hyperinflation therapy;
• demonstrate appropriate documentation of therapy;
• maintain asepsis regarding the above stated skills and clean, disinfect, and/or sterilize equipment;

Performance and Knowledge Objectives for Clinical Practice II

• assemble a circuit and humidifier system for a mechanical ventilator;
• demonstrate appropriate ability to set up and insure proper function of a mechanical ventilator;
• demonstrate appropriate ability to place initial ventilator settings on the mechanical ventilator;
• demonstrate appropriate ability to troubleshoot ventilator;
• demonstrate and understand how to assess a patient for the need of bronchopulmonary hygiene;
• demonstrate appropriate use of the various bronchopulmonary hygiene techniques currently used;
• select and appropriate bronchopulmonary hygiene device based on patient need/desire;
• demonstrate ability to appropriately suction a patient using both open and closed system methods; and
• demonstrate ability in assisting an intubation procedure.

Performance and Knowledge Objectives for Clinical Practice III & Clinical Practice IV:

• demonstrate ability to make appropriate changes in mechanical ventilation settings based on a changing patient condition;
• demonstrate how to assess a patient for their ability to wean from the mechanical ventilator;
• demonstrate an ability to assist in extubation of a patient;
• demonstrate ability to draw and analyze an arterial blood gas sample;
• demonstrate an understanding of and interpret arterial, venous, and capillary blood gas results;
• demonstrate an ability to use advanced cardiopulmonary assessment techniques such as capnography, apnea monitoring, and transcutaneous monitoring;
• demonstrate ability to perform pulmonary function testing;
• demonstrate ability to perform electrocardiograms (EKG);
• demonstrate an ability to apply hospital base protocols for the delivery of care to a patient;
• demonstrate an ability to place a patient on non-invasive positive pressure ventilation;
• demonstrate an ability to adjust the settings and mask based on patient response to non-invasive positive pressure ventilation;
• demonstrate an ability to safely transport a patient within a hospital; and
• demonstrate an ability to initiate and conduct home Respiratory Care.

SL 110 - Beginning Sign Language Communication I (ASL)

Fulfills SUNY General Education – Foreign Language.

Note: As a SUNY General Education course SL110 may only be used by students in programs leading to certification in elementary and secondary education or in programs leading to careers where there is likely to be significant contact with the hearing-impaired.

Course Outcomes
Upon completion of this course, the student will be able to:

• demonstrate a working sign language vocabulary of approximately 400 signs;
• demonstrate the ability to produce and comprehend conversation in sign language employing semantically correct American Sign Language (ASL);
• demonstrate a basic understanding of language, American deaf people, their history, and culture;
• demonstrate a rudimentary ability to match facial expression and body language to the tone of the English message; and
• demonstrate the ability to sign and comprehend numbers 1-30.

SL 111 - Beginning Sign Language Communication II (ASL)

Fulfills SUNY General Education – Foreign Language.

Note: As a SUNY General Education course SL111 may only be used by students in programs leading to certification in elementary and secondary education or in programs leading to careers where there is likely to be significant contact with the hearing-impaired.

Course Outcomes
At the end of the course the student should be able to:

• demonstrate a working sign language vocabulary of approximately 650 signs, numbers and classifiers in conversation topics relating to daily routines, writing terms, education, deaf education, daily conversation, etc.;
• demonstrate the ability to produce and comprehend conversation in using sign language by employing semantically correct American Sign Language (ASL) Signs and English concepts while utilizing appropriate ASL classifiers;
• demonstrate a basic understanding of language, American deaf people, their history, education, language and culture;
• demonstrate the ability to use American Sign Language and explain the contents of variety of written material from paragraphs to short stories or song lyrics using the appropriate ASL signs, classifiers and facial expressions; and
• demonstrate a rudimentary ability to match facial expressions, gestures and body language to the tone of the English message.

 

F/S, SS (C, N, S)

SS 102 - Social Problems

Fulfills SUNY General Education – Social Sciences.

Course Outcomes
Upon completion of a Social Problems course focused on social gerontology, the student will be able to:

• define social gerontology and discuss its origins and current area of focus;
• discuss the reasons for and explain the research methods used to study social gerontology;
• summarize biological and physiological changes related to aging;
• discuss ways in which the environment can be modified to help accommodate biological changes;
• distinguish chronic diseases that occur most frequently in older adults;
• explain the cognitive changes that are linked to aging as well as the theories that explain such changes and adaptations;
• discuss attitudes and beliefs about sex and love in old age;
• explain the relationship between chronic illnesses and sexuality;
• demonstrate an understanding of the social context older adults live in, such as living arrangements and employment;
• discuss the social policies and social problems affecting older adults in the U. S.;
• summarize attitudes toward death in our culture;
• discuss conditions for the care of dying people and pain management;
• define bereavement, grief and mourning; and
• define and discuss acute and long-term care and the growing need for home care.

SS 103 - Technology and Society

Fulfills SUNY General Education – Social Sciences.

Course Outcomes
Upon completion of this course, the student will be able to:

• define technology and technological activity;
• describe various theoretical models of technological transfers;
• identify the major periods of technological change;
• critically analyze the impact of technological change;
• articulate clear ideas about technology and culture;
• understand the relationship between technology and the environment;
• identify the ways in which technology affects work and community;
• learn about historical narrative and political responsibility; and
• explore the interplay between new communication technologies and society.

SS 203 - Human Sexualities

Fulfills SUNY General Education – Social Sciences.

Course Outcomes
Upon successful completion of this course, the student will:

• have an understanding of psychological, sociological, and physiological perspectives of sexuality;
• be able to discuss biological and social variables of physical attraction, sexual arousal, and sexual interaction; and
• recognize how societal norms, cross-cultural perspectives, class, economics, and public policy affect human sexuality.

SS 205 - Aging, Dying and Death

Fulfills SUNY General Education – Social Sciences.

Course Outcomes
Upon completion of the course, the student will be able to:

• explain the term “ageism” and identify the outcomes of ageism;
• differentiate primary aging and secondary aging;
• name the major theories of aging and summarize the essence of each of the theories;
• discuss the reasons for age-related cognitive changes;
• identify the changes in age-related information processing;
• provide examples of positive age-related cognitive development;
• differentiate the following social theories of aging: A. Stratification Theory, B. Self Theory, and C. Dynamic Theory;
• explain the concept “social convoy” and provide examples of the role it plays in the life of the elderly;
• explain the impact self-efficacy has on quality of life for the elderly;
• identify the factors affecting our familiarity with death;
• explain the historical attributions regarding the origins and causes of death;
• explain the variety of perspectives on death in western cultures;
• compare Native American, Mexican and Asian perspectives on death;
• explain the idea of a mature concept of death;
• identify and explain the sociological Influences on our understanding of death;
• explain the following with regard to Hospice and Palliative Care: A. the origins, B. the principles, and C. the challenges;
• discuss the problems implicit in financing of health care for the dying;
• state and explain the four definitions and determinations of death;
• differentiate between a coroner and a medical examiner;
• identify the ways a dying person copes with their life-threatening illness;
• discuss the treatment options for individuals who are facing life-threatening illness;
• discuss the role of pain management with dying patients;
• explain the “social role” of the dying patient;
• discuss the options for the patient in choosing death;
• describe the experience of grief with focus on the following: A. the course of grief, B. Mental and Emotional responses, and C. complications of grief;
• explain William Worden’s Tasks of Mourning (survivors);
• explain “narrative approach” as a model of grief (survivors);
• state the options for the disposition of the body;
• state the psychosocial benefits to last rites;
• discuss how to help children cope with change and loss brought about by a death of someone close to them;
• identify and explain a child’s coping mechanisms with their own life-threatening illness;
• describe adult coping skills on the death of their parent;
• describe adult coping skills on the death of their child;
• list and explain childbearing losses;
• state and explain the reasons for attempting suicide;
• explain the theories of suicide from the following perspectives: A. social context, B. psychological;
• state the risk factors that influence suicide;
• develop a plan for suicide prevention and intervention;
• identify coping mechanisms with the aftermath of war;
• identify coping mechanisms with the aftermath of disasters;
• identify coping mechanisms with the aftermath of violence;
• identify steps to reduce violence;
• compare and contrast the Jewish, Christian and Islamic concepts regarding death and afterlife; and
• compare and contrast the Buddhist and Hindu concepts regarding death and afterlife.

SS 206 - Spiritual Diversity

• a knowledge of spiritual groups throughout history;
• a knowledge of the principles taught by these spiritual groups;
• a comparative understanding of the spiritual principles from various spiritual groups;
• a knowledge of how such spiritual principles can be found; and
• a general knowledge of the explanations of spirituality.

SS 210 - The Para educator as a Member of the Educational Team

• demonstrate knowledge of key terms that relate to Para educators;
• demonstrate knowledge of the advantages to using Para educators in the schools;
• identify issues affecting Para educators today;
• demonstrate knowledge of the history of Para educators in the U.S.;
• demonstrate knowledge of the roles and responsibilities of administrators, teachers, and Para educators as members of the educational team;
• demonstrate knowledge of essential qualities a Para educator should possess;
• demonstrate knowledge of major educational philosophies, theories of child development, approaches for successful classroom behavior management and approaches for effective instructional practices;
• demonstrate knowledge of some of the legal rights of Para educators, students, and parents of students;
• understand the importance of the job interview and how to prepare for it; and
• demonstrate knowledge of keys to a successful start as a Para educator and keys to a successful career as a Para educator.

SS 212 - Introduction to the Teaching Profession

• identify the nature of the teaching profession;
• demonstrate knowledge of the development of the distinctive features of the history of education in the United States;
• demonstrate knowledge of the major educational concepts, models and issues;
• identify educational trends and leaders in curriculum and instruction;
• understand developmentally appropriate practices;
• design instruction and assessment consistent with the New York State Learning Standards;
• develop a philosophy of education to use in the classroom;
• understand diversity and the impact of this in the classroom;
• analyze a variety of classroom organization and management techniques;
• evaluate technology and its appropriate uses for education; and
• enhance his/her written communication performance.

SS 213 - School and Society

• identify and describe the historical development of America’s public school system;
• analyze and distinguish between schooling and education;
• identify and apply basic educational philosophies;
• identify, describe, and analyze diversity in education including students and staff;
• understand how schools are financed;
• understand the No Child Left Behind Act and how it relates to increased standardized testing;
• identify issues relating to problems and possibilities in education relating to issues of globalization; and
• understand how modern day school board meetings are run and how teachers and parents relate to them.

SS 214 - Exceptional Education

• define exceptionality;
• describe the history and treatment of individuals who are exceptional;
• explore the legislation related to exceptional education, including the No Child Left Behind Act;
• explore the family and community issues regarding exceptional education;
• describe the types of assessment instruments, strengths and weaknesses of various instruments and how they relate to the education of exceptional students;
• describe the types and characteristics of special education programs;
• explore the educational programs available to students with mental retardation, hearing loss, vision loss and students with other exceptional circumstances;
• describe the Theory of Multiple Intelligences (Gardner), how this theory can be used in the classrooms and how these relate to the academically gifted students as well as other students;
• explore administrative arrangements for, and educational management of, individuals who are academically gifted and talented;
• discuss the classroom management techniques for dealing with students who are exceptional;
• discuss the social concerns surrounding students with disabilities and who are exceptional; and
• discuss the multicultural and diversity issues surrounding students with disabilities in the preschool, school-age and adult populations.

SS 250 - Theory and Methods in the Social Sciences

• value the nature of social sciences as a scientific discipline;
• apply different research methods used by social scientists;
• justify the appropriateness of conclusions derived from social science research;
• evaluate the design of studies to address social science questions and the effectiveness of appropriate research methods;
• recognize the APA Code of Ethics in the treatment of human and nonhuman participants in the design, data collection, interpretation, and reporting of research;
• present research conclusions appropriately based on the parameters of specific research methods;
• demonstrate critical reasoning to recognize, develop, defend, and criticize arguments and other persuasive appeals; and
• evaluate appropriate information for an assignment, locate and access information and apply information to answer questions effectively.

SO 100 - Introduction to Sociology

Fulfills SUNY General Education – Social Sciences.

Course Outcomes
Upon completion of the course, the student will be able to:

• explain and appraise Sociology as a science and correct common misconceptions about the field;
• describe and compare the scientific methods used in sociological research (evidenced-based-sociology);
• define, name and describe sociological terminology, recognize researchers/theorists who have shaped the field and current research (Emile Durkheim, Karl Marx, Max Weber);
• develop critical thinking skills and scientific literacy;
• explain the basic concepts of social structure, social institutions, and cultural processes underling behavior;
• name and describe the basic concepts of social forces, social interaction, social groups, sociological thinking, intelligence, the sociological imagination, and the applied approaches to problem-solving and policy approaches to social problems;
• recognize and have an appreciation for the complexity and diversity of human-social behavior;
• apply sociolgical concepts and findings to everyday life.

SO 101 - Social Institutions

Fulfills SUNY General Education – Social Sciences.

Course Outcomes
Upon completion of the course, the student will be able to:

• explain what a social institution is;
• demonstrate knowledge of the functionalist and conflict approaches to social institutions;
• demonstrate knowledge, in broad outline, of the development of the family, education, government, the economic system, and religion as social institutions;
• explain the linkages existing among the family, education, government, the economic system and religion as social institutions;
• apply, compare, and contrast both the conflict and the functionalist approaches to the institution of the family;
• compare and contrast the conflict and functionalist approaches to the institution of education;
• compare and contrast the conflict and functionalist approaches to the institution of government;
• compare and contrast the conflict and functionalist approaches to the institution of the economy;
• compare and contrast the conflict and functionalist approaches to the institution of religion;
• compare and contrast social solidarity and social crisis as reflected in the family;
• compare and contrast social solidarity and social crisis as reflected in the government;
• compare and contrast social solidarity and social crisis as reflected in the economic system; and
• compare and contrast social solidarity and social crisis as reflected in religion.

SO 201 - Urban Sociology

Fulfills SUNY General Education – Social Sciences.

Course Outcomes
At the completion of this course, students will be able to:

• describe and compare the new urban sociology to mainstream approaches;
• describe and compare primary and applied approaches used in urban sociology;
• demonstrate an awareness of the triangular relationship between social change, the city, and personal identity;
• uncover the complexities of urban life through sociological theory;
• offer new ideas about the role of economics, politics, and culture in urban – metropolitan socio-spatial analysis;
• apply the socio-spatial perspective (SSP) to current events, especially as it relates to metropolitan policy and the environment;
• describe the impact of the urban experience on individual behavior; and
• describe the rise of cities historically and the advantages of the urban form.

SO 202 - Sociology of the Family

Fulfills SUNY General Education – Social Sciences.

Course Outcomes
Upon completion of this course the student will be able to:

• define the family and marriage;
• explain sociological theories in relation to the study of marriage and family;
• identify how societal changes have affected families, changes in role expectations, relationships, etc.;
• make the distinction between love and sexual expression;
• identify the role of communication in the family and marriage;
• describe what factors must be considered in making a decision to be a parent;
• define what family violence is and why it occurs;
• explain the affects of separation and divorce on adults and children; and
• how remarriage and stepfamilies differ from first marriages.

SO 203 - Capital: Origins of the Modern World System

Fulfills SUNY General Education – Social Sciences.

Course Outcomes
At the end of the course, the student should be able to explain:

• categories such as exchange-value, use-value, value, and surplus value as distinguished from more commonsensical or mainstream terms such as worth, value, and price;
• the historical development of exchange and money in the context of and as a consequence of major social transformations;
• the development of the modern world system as a result of the decay of feudal social relations;
• the role of historical periodization in social scientific thought;
• the origins of the industrial and scientific/technological revolutions in the context of the modern world system;
• the distinction between the characteristics of generalized commodity production from all previous historical periods in which commodities were produced;
• why capitalism may be viewed as the most revolutionary social system in world history;
• the relationship between capital accumulation and the development of 17th to 19th century colonialism;
• a dialectical materialist approach to the development of knowledge and real relations;
• the application of such concepts as negation and negation of the negation as they apply to social forces;
• the role of abstraction in the development of new knowledge;
• alienation in modern society;
• commodity fetishism in modern society; and
• historical materialist methodology as it applies to the analyses of social transformations.

SP 110 - Elementary Spanish I

Fulfills SUNY General Education – Foreign Language.

Course Outcomes
Upon completion of this course, the student will be able to:

• comprehend and utilize fundamental vocabulary in speech, reading and writing;
• utilize basic grammatical structures of the language;
• understand, read and write basic Spanish;
• converse in the language on a basic level;
• recognize the cultural diversity of the people who speak the language; and
• acquire knowledge of the areas of the world where the language is spoken.

SP 111 - Elementary Spanish II

Fulfills SUNY General Education – Foreign Language.

 

Course Outcomes
Upon completion of this course, the student will be able to:

• comprehend and utilize fundamental vocabulary in speech, reading and writing;
• utilize basic grammatical structures of the language;
• understand, read and write basic Spanish;
• converse in the language on a basic level;
• recognize the cultural diversity of the people who speak the language; and
• acquire knowledge of the areas of the world where the language is spoken.

SP 112 - Intermediate Spanish I

Fulfills SUNY General Education – Foreign Language.

 

Course Outcomes
Upon completion of this course, the student will:

• comprehend and utilize fundamental vocabulary in speech, reading and writing;
• utilize grammatical structures of the language;
• understand, read and write basic to intermediate Spanish;
• converse in the language on a basic to intermediate level;
• recognize the cultural diversity of the people who speak the language; and
• acquire knowledge of the areas of the world where the language is spoken.

SP 201 - Spanish Composition I

Fulfills SUNY General Education – Foreign Language.

 

Course Outcomes
Upon completion of this course, the student will :

• demonstrate intermediate to advanced proficiency in oral communication in Spanish;
• demonstrate intermediate to advanced proficiency in written communication in Spanish, including
  • the ability to analyze a problem and synthesize a solution through appropriate research;
  • the ability to integrate emerging technologies into research and communication; and
  • the ability to demonstrate an understanding of core concepts and research methods.
• demonstrate the ability to engage in critical thinking; and
• demonstrate a global awareness of the target culture’s presence in the world.

SP 202 - Spanish Composition II

Fulfills SUNY General Education – Foreign Language.

 

Course Outcomes
Upon completion of this course, the student will :

• demonstrate advanced proficiency in oral communication in Spanish;
• demonstrate advanced proficiency in written communication in Spanish, including
  • the ability to analyze a problem and synthesize a solution through appropriate research;
  • the ability to integrate emerging technologies into research and communication; and
  • the ability to demonstrate an understanding of core concepts and research methods.
• demonstrate the ability to engage in critical thinking; and
• demonstrate a global awareness of the target culture’s presence in the world.

SP 205 - Introduction to Spanish Literature

Fulfills SUNY General Education – Foreign Language.

Course Outcomes
Upon completion of this course, the student will:

• comprehend and utilize fundamental vocabulary in speech, reading and writing;
• utilize grammatical structures of the language;
• understand, read and write basic to intermediate Spanish;
• converse in the language on a basic to intermediate level;
• recognize the cultural diversity of the people who speak the language; and
• acquire knowledge of the areas of the world where the language is spoken.

SP 206 - Spanish Literature in Translation

• become familiar with particular works of Spanish literature;
• be acquainted with general principles of translation;
• translate parts of novels and short stories from Spanish into English;
• be able to analyze critically from a literary perspective; and
• be able to do basic research of literary works.

TE 101 - Computer Applications in Telecommunications

• explain the differences between operating system software and application software;
• explain how to view, organize, move and rename files using the current Microsoft operating systems;
• use various software packages to create documents, spreadsheets, graphs, databases and presentations;
• recognize the procedure to obtain help and online help for Microsoft Word, Microsoft Excel and Microsoft PowerPoint software;
• describe the procedure to cut, copy and paste text using Microsoft Word software;
• describe the procedure to create and insert a table into a using Microsoft Word document;
• understand and explain the difference between relative and absolute cell references in Microsoft Excel;
• explain how to produce a chart from data using Microsoft Excel;
• describe the procedure for creating a presentation using Microsoft PowerPoint; and
• explain how to insert text, clip art, pictures and charts into a Microsoft PowerPoint presentation;
• present current and emerging technologies in telecommunications to a residential or commercial client; and  
• address fair use of copyrighted materials and media in an academic environment.

TE 110 - Intro to Telecommunications

• articulate the fundamental concepts of telecommunications such as bandwidth, capacity and data rates;
• use the various color codes for cable and component recognition;
• be proficient at terminating wire connections using solderless-type connectors;
• describe basic communications concepts including networks, telephone equipment, multiplexing, switching, and transmissions media;
• express concepts in language appropriate to the telecommunications field;
• read and understand subject related literature;
• calculate communications parameters such as decibels, frequency, signal bandwidth and channel capacity;
• be proficient using basic telecommunications test equipment; and
• be familiar with installation of structured cabling.

The student will further develop the following course competencies: problem solving, teamwork, project leadership, quality, contextual learning, technology and service delivery, and customer focus.

Prerequisites: TE 101 or permission of the instructor.
F/S (S)

TE 130 - Electrical Circuits

• explain voltage, current and resistance as individual electrical concepts;
• apply voltage, current, resistance values into Ohm’s/Kirchoff’s Laws to describe circuit behavior;
• analyze dc and ac circuits to solve for unknown quantities of current, voltage resistance, impedance and/or reactance;
• explain the use of physical devices including resistors, capacitors, inductors and transformers in practical circuits;
• identify common electrical hardware components/systems and their values;
• read electrical schematics proficiently;
• assemble hardware devices using proper connections and the appropriate supply power;
• use measurement techniques of common electrical test equipment;
• wire, test and analyze electrical circuits using an industry standard software package;
• recognize series, parallel and combination circuit relationships;
• understand and explain how power is generated, measured and used in an electrical circuit;
• show competence in discussing ac circuit concepts such as reactance, impedance, resonance and power relationships; and
• select reactive components for power factor correction.

TE 135 - Electronics I

• describe the operation of transformers applied to power supplies;
• understand and explain in general how semiconductors operate and how they differ from traditional electrical components;
• describe the operation and applications of diodes applied to linear power supplies;
• build, design and test half-wave and full-wave linear power supplies;
• observe and describe source and load voltage regulation;
• use hardware and computer simulation software to wire and test electronic circuits;
• describe switching power supply operation;
• analyze and design inverting and non-inverting IC Op Amp circuits for a specified gain;
• identify, describe, and calculate the behavior of specialty Op Amp circuits such as comparators, window comparators, summing amps, scaling amps, averaging amps circuits;
• explain frequency concepts in electronics;
• describe the characteristics of light radiation and the operation of special purpose diodes such as LEDs and lasers; and
• explain amplifier concepts, input and output impedance, gain in ratio and in decibels.

TE 145 - Digital I

• design, construct and test digital logic circuits to meet the demands of any four input logic circuits;
• simulate simple logic circuits using application software;
• describe the relationship between digital and analog quantities;
• describe digital computer organization and operation including the CPU, motherboard, and memory; and
• explain different types of primary and secondary storage devices. 

 

Prerequisites: TE 101 or permission of instructor
S (S)

TE 180 - IT Essentials I

• identify types and characteristics of PC components, including motherboard, CPU, memory, and storage, input, and output devices;
• install and configure peripheral devices;
• identify types and characteristics of portable computers;
• analyze and trouble-shoot digital systems used in the creation and transport of digital information and conversion to analog output;
• install and configure current Microsoft Windows operating systems;
• perform basic PC hardware maintenance and troubleshooting;
• demonstrate fundamental principles of securing IT systems and working safely;
• communicate effectively with customers; and
• implement fundamental principles of connection to LANs and Internet access.

TE 181 - IT Essentials II

• install, configure and maintain personal computer components;
• detect problems, troubleshoot and repair/replace personal computer and laptop components;
• analyze and trouble-shoot digital systems used in the creation and transport of digital information and conversion to analog output;
• select and use the proper tools;
• detect and resolve common printer issues;
• select the appropriate commands and options to troubleshoot and resolve problems;
• differentiate between Windows Operating System directory structures;
• select and use system utilities / tools and evaluate the results;
• troubleshoot client-side network connectivity issues using appropriate tools;
• install and configure a small office home office (SOHO) network;
• prevent, troubleshoot and remove viruses and malware; and
• implement security and troubleshoot common issues.

TE 185 - Network Fundamentals

Course topics include, but are not limited to, focus on IP Networks, Network Devices, OSI, TCP/IP and IP Addressing, LAN/WAN Topology and Design, and Router and Switch IOS Basics.

Course Outcomes
Upon successful completion of this course the student will be able to:

• understand and describe the devices and services used to support communications in data networks and the Internet;
• understand and describe the importance of addressing and naming schemes at various layers of data networks in IPv4 and IPv6 environments;
• design, calculate, and apply subnet masks and addresses to fulfill given requirements in IPv4 and IPv6 networks;
• explain fundamental Ethernet concepts such as media, services, and operations;
• build a simple Ethernet network using routers and switches;
• use Cisco command-line interface (CLI) commands to perform basic router and switch configurations; and 
• utilize common network utilities to verify small network operations and analyze data traffic.

TE 212 - Telecommunications IV

• explain Asynchronous Transfer Mode (ATM) transmission and cell structure;
• describe Synchronous Optical Network (SONET) transport and frame structure;
• demonstrate the Digital Subscriber Line (xDSL) access technology;
• analyze Frame Relay access;
• clarify modern modulation techniques and applications;
• illustrate fiber optic access technologies (FTTx) and fiber networks;
• define wireless telecommunications methods and systems;
• compare services over IP;
• explain cryptography;
• understand computer and network security; and
• research and present details of a new communications technology;
• analyze and trouble-shoot digital systems used in the creation and transport of digital information and conversion to analog output;
• use various software packages to create documents, spreadsheets, graphs, databases and presentations;
• design voice, data, LAN and WAN telecommunications networks;
• demonstrate proficiency in the installation of telecommunication end-user equipment, switching and transmission equipment;
• be proficient in the use of various topologies, transmission media, network interfaces and shared resources to interconnect telecommunications networks; and
• present current and emerging technologies in telecommunications to a residential or commercial client.

TE 218 - Help Desk Professional

• define Help Desk and its role in organizations and how it can improve business;
• recognize technologies that impact the Help Desk when used to collect information and deliver support; and
• communicate technical instructions effectively for non-technicians.

TE 232 - Electronics II

• use software and hardware to build, measure, and troubleshoot electronic communication circuits;
• analyze the operation of low pass, high pass, band pass and band stop filters;
• become proficient in constructing and testing filter circuits;
• demonstrate capability in explaining oscillator concepts as they apply to communications;
• gain proficiency in traditional electronic modulation techniques including AM, FM and pulse modulation;
• assemble a simple amplitude modulator;
• understand high level digital modulation techniques for contemporary communications;
• possess knowledge of multiplexing and timing concepts;
• demonstrate an understanding of the principles and applications of phase locked loops, oscillators, AtoD/DtoA converters and mixers;
• build a phase locked loop to match Instructor specifications;
• specify transmission lines by application;and
• select antennas based on signal radio frequency characteristics.

TE 240 - Digital II

• analyze the difference and similarities from personal computers to notebooks, tablets, PDAs and other handheld devices;
• demonstrate a basic understanding of networks;
• show how to manage and support Windows security, registry, and recovery methods;
• demonstrate how to customize the computer for each individual customer use; and
• explain how to work with support services.

TE 270 - Routing and Switching I

• understand and describe basic switching concepts and the operation of Cisco switches;
• understand and describe enhanced switching technologies such as VLANs, VLAN Trunking Protocol (VTP), Spanning Tree Protocol (STP) and 802.1q;
• configure and troubleshoot basic operations of a small switched network;
• understand and describe the purpose, nature, and operations of a router, routing tables, and the route lookup process;
• configure and verify static routing and default routing;
• understand and describe how VLANs create logically separate networks and how routing occurs between them;
• understand and describe dynamic routing protocols, distance vector routing protocols, and link-state routing protocols;
• configure and troubleshoot basic operations of routers in a small routed network, like:
• a. Routing Information Protocol (RIPv1 and RIPv2)
• b. Open Shortest Path First (OSPF) protocol (single-area OSPF)
• c. VLANs and inter-VLAN routing
• configure, monitor, and troubleshoot ACLs for IPv4 and IPv6.
• configure and troubleshoot Dynamic Host Configuration Protocol (DHCP) and Domain Name System (DNS) for IPv4 and IPv6; and
• configure and troubleshoot Network Address Translation (NAT) operations.

TE 271 - Routing and Switching II

• configure and troubleshoot DHCP and DNS operations for IPv4 and IPv6;
• understand and describe the operations and benefits of the Spanning Tree Protocol (STP);
• configure and troubleshoot STP operations;
• understand and describe the operations and benefits of link aggregation and Cisco VLAN Trunk Protocol (VTP);
• configure and troubleshoot VTP, STP, and RSTP;
• configure and troubleshoot basic operations of routers in a complex routed network for IPv4 and IPv6;
• configure and troubleshoot Open Shortest Path First (OSPF) protocol (single-area OSPF and multi-area OSPF);
• configure and troubleshoot Enhanced Interior Gateway Routing Protocol (EIGRP);
• configure and troubleshoot advanced operations of routers and implement RIP, OSPF, and EIGRP routing protocols for IPv4 and IPv6; and
• manage Cisco IOS^® Software licensing and configuration files.

 

Prerequisites: TE 270
F/S (S)

TE 272 - Accessing the WAN

• understand and describe different WAN technologies and their benefits;
• understand and describe the operations and benefits of virtual private networks (VPNs) and tunneling;
• configure and troubleshoot serial connections;
• configure and troubleshoot broadband connections;
• configure and troubleshoot IPSec tunneling operations;
• monitor and troubleshoot network operations using syslog, SNMP, and NetFlow;
• design network architectures;
• understand, describe, and design borderless networks; and
• understand, describe, and design data centers and virtualization.

TE 275 - CCNA Security

• explain the importance of data networks and the Internet in supporting business. communications and everyday activities;
• explain how communication works in data networks and the Internet;
• describe the security threats facing modern network infrastructures;
• secure network device access;
• implement AAA on network devices;
• mitigate threats to networks using ACLs;
• implement secure network management and reporting;
• mitigate common Layer 2 attacks;
• implement the Cisco IOS firewall feature set;
• implement the Cisco IOS IPS feature set;
• implement site-to-site IPSec VPNs; and
• administer effective security policies.

TE 276 - CCNP I:Implementing IP Switching

• implement, monitor, and maintain switching in an enterprise campus network;
• implement VLANs in campus networks;
• configure and optimize high availability and redundancy on switches;
• describe and implement LAN security features; and
• plan and prepare for advanced services in a campus infrastructure.

TE 277 - CCNP II:Implementing IP Routing

• explain complex network requirements and design models for implementing advanced routing services in an enterprise network;
• implement EIGRP and OSPF in an enterprise network;
• implement various mechanisms for controlling routing updates and traffic;
• implement path control using IP SLA and PBR;
• implement BGP to allow an enterprise network to connect to an ISP;
• describe a basic implementation for branch office and mobile worker connectivity; and
• describe and configure IPv6 in an enterprise network.

TE 278 - CCNP III:Maintaining and Troubleshooting IP Networks

• plan and document the most common maintenance functions in complex enterprise networks;
• develop a troubleshooting process to identify and solve problems in complex enterprise networks;
• select tools that best support specific troubleshooting and maintenance processes in large, complex enterprise networks;
• practice maintenance procedures and fault resolution in routing and switched environments;
• troubleshoot NAT/PAT, DHCP, and other services;
• troubleshoot wireless connectivity, VoIP, and video; and
• practice maintenance procedures and fault resolution in a secure infrastructure and complex environment.

TE 279 - CCNA Voice

• describe the components of a Cisco Unified Communications solution and identify call signaling and media stream flows;
• provide an overview of administrator and end-user interface options with Cisco Unified Communications products and perform endpoint and end-user administration tasks;
• understand call flows in Cisco Unified Communications Manager and Cisco Unified Communications Manager Express;
• describe the telephony features supported in Cisco Unified Communications Manager and Cisco Unified Communications Manager Express;
• administer users in Cisco Unity Connection and Cisco Unified Presence, and enable the most commonly used features for both applications; and
• describe how to maintain a Cisco Unified Communications solution.

TE 291 - Internship

• perform the tasks related to their job assignment;
• be proficient in the use of various topologies, transmission media, network interfaces and shared resources to interconnect telecommunications networks;
• present current and emerging technologies in telecommunications to a residential or commercial client; and
• demonstrate an ability to accomplish with others assigned job tasks in a work environment provided by the internship program.

 

S (S)

TE 292 - Internship

• perform the tasks related to their job assignment;
• be proficient in the use of various topologies, transmission media, network interfaces and shared resources to interconnect telecommunications networks;
• present current and emerging technologies in telecommunications to a residential or commercial client; and
• demonstrate an ability to accomplish with others assigned job tasks in a work environment provided by the internship program.

TE 293 - Internship

• perform the tasks related to their job assignment;
• be proficient in the use of various topologies, transmission media, network interfaces and shared resources to interconnect telecommunications networks;
• present current and emerging technologies in telecommunications to a residential or commercial client; and
• demonstrate an ability to accomplish with others assigned job tasks in a work environment provided by the internship program.

 

S (S)

TE 294 - Internship

• perform the tasks related to their job assignment;
• be proficient in the use of various topologies, transmission media, network interfaces and shared resources to interconnect telecommunications networks;
• present current and emerging technologies in telecommunications to a residential or commercial client; and
• demonstrate an ability to accomplish with others assigned job tasks in a work environment provided by the internship program.

 

S (S)

TH 100 - Orientation to Disability Groups

• describe common disabilities and their associated illnesses;
• define basic medical and psychiatric terminology relating to disabilities;
• describe programming techniques used to modify and conduct recreational and physical education activities for individuals with disabilities; and
• identify agencies in the community which service individuals with disabilities.

 

F/S (C, S)

VC 100 - Ophthalmic Dispensing I

• list and identify historical and evolutionary developments related to opticianry;
• list laws governing opticianry in New York State;
• list and identify anatomical and physiological functions of the human eye;
• analyze eye planes and interocular distances related to ophthalmic lenses;
• list and discuss visual acuity testing systems; and
• list and identify refractive abnormalities of the eye.

VC 110 - Ophthalmic Lenses I

• distinguish and list the components of the electromagnetic spectrum;
• describe the action of light rays through refracting mediums;
• distinguish between various single vision lens forms;
• identify and describe basic and advance lens forms;
• apply correct formulas that relate to lens function; and
• describe various lens materials and identify specific characteristics of each.

 

F (N)

VC 133 - Introduction to Contact Lens Laboratory

• identify New York State laws governing the contact lens field;
• list individuals who made contributions to the contact lens field;
• identify anatomical structures related to contact lens wear;
• discuss contact lens materials and designs;
• explain indications, contraindications, advantages and disadvantages of contact lenses;
• discuss the use of contact lens solutions; and 
• demonstrate psychomotor skills using the keratometer, radiuscope, diameter gauge, and thickness gauge.

VC 140 - Ophthalmic Assisting

• demonstrate knowledge of and ability to take a relevant, concise ophthalmic history;
• identify basic anatomy and physiology of the eye;
• demonstrate knowledge of the basic concept of the field of vision and instrument use;
• demonstrate knowledge of ophthalmic ointments and understand the advantages and disadvantages of each;
• demonstrate knowledge of and instrument use;
• distinguish between objective and subjective autorefraction;
• demonstrate basic knowledge of and ability to perform color vision test and use of Amsler grid;
• identify basic ophthalmic emergencies and procedures;
• demonstrate basic knowledge of microbial control, sanitation, disinfection, sterilization and contamination;
• identify basic ophthalmic instrumentation and their uses, and perform basic maintenance; and
• demonstrate knowledge of HIPAA and how it influences policy, procedure and duties in the ophthalmic health care setting.

 

F (N)

VC 141 - Assisting and Refraction Lab

• capture, save and retrieve high resolution digital retinal images utilizing the fundus camera;
• measure and record intraocular pressure with use of a non-contact tonometer;
• determine refractive error with automated refraction testing utilizing simultaneous cross cylinders;
• conduct auto lensometry; and
• perform standard white/white kinetic perimetry using an automated visual field system.

VC 142 - Contact Lenses I

• determine the proper type and prescription for soft contact lenses;
• discuss the aspects of fitting rigid and soft contact lenses and the follow-up care;
• know the indications and contraindications to contact lens wear;
• design spherical rigid lenses; and
• identify different types of edema.

 

Prerequisites: VC 133
Concurrent Registration: VC 143
S (N)

VC 143 - Lab for VC 142

• demonstrate the usage of instruments needed in the fitting of contact lenses;
• discuss the aspects of fitting rigid and soft lenses and the follow-up care;
• express the terminology of contact lens fitting;
• fit soft contact lenses;
• evaluate corneal topography;
• insert and remove soft contact lenses;
• obtain a contact lens history;
• verify contact lens parameters; and
• perform a visual acuity check.

 

Prerequisites: VC 133
Concurrent Registration: VC 142
S (N)

VC 150 - Ophthalmic Dispensing II

• distinguish between different frame construction and materials;
• identify frame components, frame mounting systems and their applications;
• determine uses of specialty frame products including sport/safety and other specialty frame designs;
• define boxing system terminology and frame and lens measurements including application;
• calculate lens decentration and minimum blank size as it correlates to the boxing system;
• apply formulas used in spherical and cylinder lenses;
• perform prescription transposition, optical cross, nominal power and lens curvature formulas;
• perform an analysis of ophthalmic prisms which will include descriptions of prisms, classification of prismatic effects and measurements, splitting, and combining of ophthalmic prisms;
• the proper use of Prentice’s Rule in decentering single vision lenses to create prism; and
• identify the proper functions of multifocal lenses including lens decentration/inset and proper segment placement.

VC 160 - Ophthalmic Lenses II

• identify and record the information necessary to duplicate lenses covered in class;
• apply formulas that relate to functions of spectacle lenses;
• measure and apply appropriate formula to determine proper base curve of a given lens;
• conduct analysis of varying lens product enhancements of all ophthalmic lens materials;
• identify and describe various single vision, multifocal and specialty lens forms;
• distinguish and describe various lens tints and their appropriate uses; and
• describe different lens aberrations and proper methods for limiting their unwanted characteristics.

 

Prerequisites: VC 110
S (N)

VC 232 - Contact Lenses II

• fit all makes of contact lenses;
• discuss the aspects of fitting rigid and soft lenses and the follow up care;
• express the terminology of contact lens fitting;
• assess how to fit special lenses; and
• participate in National Contact Lens Certification Examination and the New York State Contact Lens Licensing Examination.

 

Prerequisites: VC 142
Concurrent Registration: VC 233
F (N)

VC 233 - Lab for VC 232

• demonstrate the usage of instruments needed in the fitting of contact lenses;
• discuss the aspects of fitting rigid and soft lenses and the follow-up care;
• express the terminology of contact lens fitting;
• assess how to fit special lenses;
• evaluate fluorescein patterns; and
• participate in the National Contact Lens Certification Examination and the New York State Contact Lens Licensing Examination.

 

Prerequisites: VC 142
Concurrent Registration: VC 232
F (N)

VC 240 - Ophthalmic Dispensing III

• determine the effects of presbyopia and select appropriate lens for its correction;
• evaluate difference lens styles;
• compare and contrast the multitude of lens styles available;
• manipulate patients prescription to meet differing visual requirements;
• distinguish proper segment placement of varying multifocal styles;
• identify anisometropic prescriptions leading to vertical imbalance;
• determine proper method for the correction of vertical imbalance;
• conduct use of proper formulas for calculating vertical imbalance;
• identify the concept and early design of progressive addition lenses;
• analyze the current technology used in the creation of modern progressive lenses;
• identify the proper methods used in the fitting and dispensing of progressive lenses;
• determine design characteristics and proper uses of specialty progressive lenses;
• evaluate effect of digital surfacing principles with evolving progressive lens design;
• distinguish between the different forms of glare and proper lens selection for their management;
• identify differing forms of radiant energy and its effect on the eye;
• identify differing absorptive lenses and their appropriate uses; and
• evaluate the effects of different lens coatings on ophthalmic lens surfaces including scratch resistant, anti-reflective and mirror.

VC 243 - Contact Lens Clinic Practice

• demonstrate the usage of instruments needed in the fitting of contact lenses;
• discuss the aspects of fitting rigid and soft lenses and the follow-up care;
• take a contact lens history;
• educate patients in the proper insertion, removal and care of contact lenses;
• evaluate the fit of soft contact lenses;
• communicate effectively with patients; and
• participate in the National Contact Lens Certification Examination and the New York State Contact Lens Licensing Examination.

VC 245 - Ophthalmic Fabrication I

• demonstrate the proper use of lensometer;
• perform neutralization of spherical and cylindrical lenses;
• demonstrate proper techniques of hand beveling ophthalmic lenses;
• identify and properly use common ophthalmic hand tools and measuring devices;
• develop proper bench alignment skills;
• perform basic ophthalmic frame repair;
• demonstrate proper layout of single vision and multifocal lenses;
• learn and complete job work ticket;
• edge, assemble and verify completed single vision and multifocal eyewear; and
• demonstrate application of ANSI standards.

 

F (N)

VC 246 - Ophthalmic Dispensing Lab I

• demonstrate lens neutralization techniques;
• analyze single vision and multifocal prescriptions;
• interpret prescription ordering terminology;
• develop effective ophthalmic record keeping;
• demonstrate visual axis measurement theory;
• apply dispensing procedure theory;
• dispense basic plastic and metal eyewear;
• perform basic facial measurements;
• utilize all required hand tools for frame adjustments;
• employ standard order form; and
• interact courteously and calmly with student/patient.

VC 250 - Ophthalmic Dispensing IV

• distinguish between the multiple tests done in the preliminary eye examination;
• identify microbes which cause eye infections, ocular conditions and anatomy affected by the particular microbe and methods of reducing their spread in eye practices;
• distinguish between different ocular pharmacology agents and the application methods of these agents;
• identify cataract terminology, formation and surgical techniques used for the removal of cataracts;
• conduct an analysis of the different methods of aphakic correction including spectacles, contact lenses and intraocular lens implants;
• evaluate refractive surgical techniques with emphasis on most current technology and special challenges and concerns in fitting post refractive surgical patients with contact lenses and spectacles;
• identify the most common eye diseases and their treatments including macular degeneration, glaucoma, diabetic retinopathy along with test and treatment of these diseases;
• develop proper techniques for identifying and correcting complex and unusual vision prescriptions including aniseikonic, high minus and high plus; and
• apply knowledge of low vision problems to determine appropriate device for its management.

VC 255 - Ophthalmic Fabrication II

• fabricate and evaluate bifocal and progressive multifocal lenses;
• demonstrate ability to tint and polish spectacle lenses;
• demonstrate ability to work with different ophthalmic frame materials;
• create prism in finished vision eyewear;
• repair hidden hinges in zyl frames;
• demonstrate ability to solder frames;
• repair frames with broken eye wire and temple screws;
• groove and insert lenses into nylon rimless frame; and
• demonstrate application of ANSI standards.

VC 256 - Ophthalmic Dispensing Lab II

• dispense all plastic, combination, rimless and metal eyewear;
• analyze and interpret special and extraordinary prescriptions, including presbyopic, cataract, prism, and high powers;
• perform dispensing skills;
• identify and apply components of a electronic based recording and ordering systems; and
• perform the various requirements needed in off-campus clinic operations and replicated dispensing scenarios.

VC 261 - General Dispensing Practice

• complete minor repairs to customers eyewear;
• readjust eyewear to customers satisfaction in a normal period of time;
• interact courteously with co-workers and customers alike;
• apply skills learned in Ophthalmic Dispensing Lab to situations encountered in actual business practice;
• suggest appropriate eyewear to the public regarding frame compatibility with the customer prescription;
• describe benefits accruable to the customer based on frames, size, color, type, and/or material;
• take all required facial and anatomical measurements to correctly fabricate the customer’s prescription;
• deliver the completed eyewear to the customer, making all necessary adjustments beyond the basic bench adjustment, including directions to the customer on proper handling, maintenance and pitfalls concerning adjustment to the new optical power of the lenses and prescription;
• document and place order, transmit specifications and record appropriate laboratory information;
• maintain price and product lists by monitoring price and product availability;
• determine patient’s participation in a third party program and complete appropriate documentation; and
• establish rapport with patient and demonstrate professional and ethical conduct.

VC 264 - Ophthalmic Practice Management

• describe the skills and licensure requirements necessary to obtain an entry level position as a dispensing optician;
• utilize successful communications skill with patients including special needs strategies;
• address the needs of a culturally diverse patient base;
• demonstrate application of HIPAA regulations as they pertain to patients in the ophthalmic practice;
• contrast present day marketing strategies of various dispensing practices adopting or rejecting favorable position;
• calculate markup procedures for a dispensing practice;
• evaluate capture rate and chair cost as critical benchmarks for practice; and
• prepare and present a research report stating support or opposition of a practice management topic.

VC 283 - Advanced Contact Lens Lab

• demonstrate the usage of instruments needed in the fitting of contact lenses;
• discuss the aspects of fitting rigid and soft lenses and the follow-up care;
• express the terminology of contact lens fitting;
• fit rigid and soft contact lenses;
• assess how to fit special lenses;
• understand the management of a contact lens practice;
• design contact lenses; and
• participate in the National Contact Lens Certification Examination and the New York State Contact Lens Licensing Examination.

GA 101 - Orientation to Graphics

• identify basic terminology used in the printing industry;
• recognize major individuals and dates in history who contributed to the invention of the printing process;
• identify various products such as advertising/ads, posters, calendars, brochures, newsletters, books, product labels & packaging, music industry products, postcards, etc. as viable products for printing; their varied uses and appearances;
• recognize products from the past that are examples of fine communication/printing craftsmanship and beauty;
• understand the basic process used to produce a product in the printing industry as well as identify basic equipment;
• measure in points and picas, compare and convert point and picas to other measurement systems;
• understand, be able to decipher and apply mark-up codes to rough copy;
• identify the fundamentals of typography;
• identify basic components and principles of good layout and design;
• identify the differences between thumbnails, roughs, comprehensives and how to render a basic rough;
• correctly measure and mark-up specified projects using points and picas; and
• be able to utilize a sketch/note book as a means for collecting and organizing related ideas, data, information, etc. as part of the process involved in designing products for printing.

GA 102 - Publishing I Basics

• navigate through the operation system of the Apple computer;
• proficiently use various Apple software tools;
• describe the importance of page layout programs in the graphic arts industry, as well as identify different types of software programs;
• apply design principles and typography in a pleasing layout;
• understand the steps in the creative process and utilize them during class;
• utilize the page layout software application; and
• use hardware in conjunction with class requirements.

GA 103 - Electronic Imaging I

• recognize standard graphic formats, color spaces and documents;
• produce and convert basic graphic documents into a PDF workflow;
• solve imposition calculations for page creep, ganging and step and repeat;
• modify quality control devices and marks relevant to specific outputs;
• classify Imposition layouts for books and flat sheet layouts;
• apply Impositions to specific binding and Workstyles utilizing a digital workflow; and
• modify output device dependent settings to achieve predictable results.

GA 105 - Lithographic Press I

• explain the operations required to produce a printed product;
• explain the role of the graphic arts technician and their relationship with the members of the print production team;
• demonstrate the ability to operate and maintain a variety of printing/bindery equipment;
• present ideas verbally, demonstrating craftsmanship and confidence in a commercial print shop environment;
• demonstrate safe working habits and practices in an industrial environment;
• demonstrate proper material handling abilities; and
• demonstrate increased verbal and visual communication skills in presenting one’s ability to apply standard practices in a printing production environment.

GA 121 - Publishing With InDesign™

• proficiently use the InDesign software;
• understand and describe the importance of page layout programs in the graphic arts industry to produce high end products for printing;
• describe the impact of printing variables (ex: paper, ink, color, etc.) on the production process and your designs;
• apply design principles, color and typography in a pleasing layout;
• use hardware in conjunction with the class requirements; and
• describe the steps in the creative process, and utilize them during the lab sessions to produce both hard and soft proofs for proofreading, presentation and publication.

GA 122 - Electronic Imaging II

• learn about how job tickets provide checklists of general information for use by both prepress and press, and bindery departments;
• plan and create an imposition that will be saddle stitched;
• learn about how to plan for proper clamp and gripper allowances;
• learn about the importance of printing controls like crop marks, registration marks, and color bars and how to create each in an imposition software application;
• send digital files for output to a wide format printer;
• create a two color step and repeat imposition;
• plan an imposition based on a work and turn layout style;
• create an imposition that will be printed on two sides of a press sheet;
• study sequential page order for various types of signatures;
• send digital files to output computer to plate;
• learn why computer application software continues to replace the traditional imposition (stripping) methods for plate making; and
• learn how unwanted patterns (moiré) are created in printing and how to avoid and correct them.

GA 124 - Lithographic Press II

Hands-on advanced procedures in operating duplicator presses will include multi-colored registration, PH measuring, ink mixing, finishing, press and paper problem solving, as well as plate developing and troubleshooting. The course objective is to produce well-registered, multi-colored jobs for inclusion in a portfolio.

Course Outcomes
Upon completion of this course, the student will be able to:

• explain the operations required to produce a printed product;
• explain the role of the graphic arts technician and their relationship with the members of the print production team;
• demonstrate the ability to operate and maintain a variety of printing/bindery equipment;
• present ideas verbally, demonstrating craftsmanship and confidence in a commercial print shop environment;
• demonstrate safe working habits and practices in an industrial environment;
• demonstrate proper material handling abilities; and
• demonstrate increased verbal and visual communication skills in presenting one’s ability to apply standard practices in a printing production environment.

GA 125 - Create With Illustrator®

• demonstrate the principles of layout and graphic design as applied to commercial printing;
• explain the role of art director and the relationship with the customer and other members of the print production team;
• explain the history illustration in advertising, demonstrate several styles and its use in an advertising campaign;
• present ideas visually, demonstrating craftsmanship and confidence in a simulated commercial print job environment;
• learn to use the elements of design to create object-oriented vector graphics as part of a dynamic and compelling layout;
• use the basic techniques in creating graphics with Adobe Illustrator on the Macintosh computer; and
• demonstrate industry standard skills in preparing one’s own work for a professional portfolio.

GA 126 - Visual Design Basics

• demonstrate the principles of layout and graphic design as applied to commercial printing;
• explain the role of graphic designer, graphic technician and the relationship with the customer and other members of the print production team;
• explain the history of graphic design of the 20th century to present day trends. Be conversant in several styles and recognize their effect on advertising and the print media today;
• present ideas visually, demonstrating craftsmanship and confidence in a simulated commercial print job environment;
• create object-oriented vector graphics as part of a dynamic and compelling layout;
• create a basic 3-dimensional digital mechanical and mockup for a client presentation; and
• demonstrate increased verbal and visual communication skills in presenting one’s own work through preparation and presentation of a portfolio.

GA 131 - Photoshop I®

• output color proofs of images that have gone through basic image editing;
• apply special effects with filters;
• have knowledge of working with PhotoShop selection tools like the rectangular and elliptical marquee tools;
• select an image with the magic wand;
• use the lasso tool to select areas to be modified;
• organize artwork on layers;
• select and remove artwork on a layer;
• add a gradient to a layer effect;
• work with masks and channels;
• photo retouching, resolution and image size, adjust tonal range;
• use pen tool techniques and drawing paths around artwork; and
• know the basics of file formats.

GA 133 - Lithographic Press III

• identify basic terminology utilized within the graphic arts industry;
• recognize the various processes used to produce a project and the equipment utilized in the process;
• identify the proper maintenance procedures relating to a variety of printing and bindery machinery;
• recognize the need to follow safety procedures including chemical and mechanical hazard identification;
• employ measuring techniques in a variety of formats;
• develop procedures to follow in verifying position and register on a variety of printing and bindery equipment;
• gain competency in properly setting up a variety of printing and bindery equipment;
• recognize the importance of properly imposing images for the production on printing and bindery machinery; and
• develop the skills required to safely handle materials in the print shop.

GA 134 - Print Administration/Quality Control

• describe seven functions of management;
• identify the unique factors of the printing industry as both a service and manufacturing industry;
• identify the different components of printed product, determine what method(s) produced them, and understand how a product is estimated and priced in the printing industry;
• recognize different methods to control production efficiency; and
• describe various quality control methods used in the printing Industry.

GA 135 - Digital and Variable Data Printing

• identify basic advertising and marketing concepts;
• interpret database development, manipulation and preparation for VDP;
• define the production stages in variable data publishing;
• define the system components in a variable data print and publish workflow;
• define the levels of VDP; and
• develop, digitally create and print personalized products by merging static document elements from a page layout template and variable document elements imported from a database.

GA 140 - Publishing IV Web Basics

• identify the basics and background of the www; identify the basics of HTML as a coding technique for construction of web pages and the basic do’s and don’ts of good web design;
• identify basic codes, software and equipment necessary to construct a document in HTML format on the internet;
• construct a basic home page using a range of HTML codes from formatting, to color, to links, etc. for the web and a personal home page that includes advanced coding techniques that tie in with an identity package;
• understand basics of good logo design and the application to varied sizes within identity package components;
• identify “forms design” as the umbrella concept for creating a range of industry identity products including: the five basic functions of forms a planning check list for constructing effective and clear forms;
• identify and provide background for various components that make up an identity package for an individual or corporation: letterheads, business cards, envelopes, memo forms, purchase orders, shipping labels, invoices, compliment and packing slips, inventory sheets, employee record forms, cost/sales reports, expense vouchers, policy statements, news releases, personal portfolio, resume, etc.;
• construct specific components for an identity package in linear format using either QuarkXPress, InDesign or another suitable page assembly program;
• identify and use proper paper stock for specific id package components: writing/text, cover, NCR papers, etc.;
• calculate the most efficient multiple imposition for producing smaller items on a larger sheet size;
• select and correctly input data for using the step and repeat function for multiple imposition; and
• identify the basic components of book construction and construct several book page components for inclusion in a personal portfolio in binder format that is part of the identity package.

GA 141 - Photoshop II®

• make a composition (surrealistic) with a number of digital camera images that have been cropped, color corrected, any imperfections removed, etc. to create an artful composition;
• make vector shapes and use clipping paths;
• use layer effects and create floating selections;
• use clipping groups;
• create animation and make key frames in ImageReady;
• learn about slices and rollovers;
• make corrections with the history brush and history palette;
• create custom brushes and settings that appear in the tool options bar;
• use actions and styles to re-create a vector graphic;
• create layer sets to organize and manage layers;
• use channels to create selections; and
• adjust the tonal range of an image by assigning black and white points.

GA 143 - Internship

• identify good interview techniques, dress attire, and preparations to interview for various industry related positions;
• participate in an interview/hiring process for acceptance into an internship position;
• relate classroom instruction and training to an assigned on-the-job experience;
• apply specific learned skills and techniques to perform effectively in the industry work environment;
• demonstrate ability to utilize critical thinking skills for problem solving on-the-job;
• communicate effectively with supervisors and workplace personnel;
• evaluate related work experience and performance in a positive manner;
• apply valuable experience to future decision making and career choices; and
• apply specific skills and experience to enhance future resume preparation.

GA 144 - Multimedia

• utilize multimedia software to create animations;
• utilize multimedia software to create an interface;
• understand multimedia history, terminology and definitions;
• utilize multimedia facts, tips, and tricks;
• compare and contrast websites;
• understand and utilize interactivity; and
• identify and utilize multimedia elements in web design.

GA 145 - Web Page Design with Dreamweaver

• utilize HTML, compare and contrast DHTML, and Java Script;
• utilize Adobe Dreamweaver to create a working web page;
• understand Web terminology and definitions;
• utilize web facts, tips, and tricks;
• compare and contrast Web sites, providers and servers;
• understand and utilize interactivity;
• promote a personal website for “hits”; and
• identify and utilize multimedia elements in web design.

 

F/S (S)

GA 146 - Intro to 3D Modeling and Animation

• demonstrate knowledge of animation software and utilize the user interface;
• define and describe basic animation techniques;
• analyze, plan and construct objects;
• analyze and arrange the movement of objects;
• analyze, plan and construct realistic backgrounds and scenes;
• develop and create characters;
• plan and execute a path for animation; and
• demonstrate the ability to animate objects with moving parts.

 

F/S (S)

GA 231 - Prepress Fundamentals

• recognize standard Graphic Formats, Color Spaces and Documents;
• produce and convert basic graphic documents into a pdf workflow;
• solve imposition calculations for page creep, ganging and step and repeat;
• modify quality control devices and marks relevant to specific outputs;
• classify imposition layouts for books and flat sheet layouts;
• apply impositions to specific binding and workstyles utilizing a digital workflow; and
• modify Output Device dependent settings to achieve predictable results.

GA 232 - Digital Imaging I

• prepare a two-color page layout document correctly for output to a postscript level output device;
• prepare and output digital halftone images;
• understand and perform basic electronic trapping techniques for simple multicolor page layouts;
• prepare and output electronic documents utilizing correct screen ruling, resolution and screen angles for a postscript level output device;
• prepare and output digital grayscale images as duotones;
• preflight spot color files for postscript output; and
• demonstrate the learned techniques and their accuracy utilizing proofs and computer to plate output.

GA 241 - Digital Imposition & Workflow

• recognize and construct standard Graphic Documents in properly formatted Color Spaces;
• produce, modify and convert basic graphic documents into a PDF workflow;
• solve Imposition calculations for Page Creep, Ganging and Step and Repeat;
• modify and Construct Quality control devices and Marks relevant to specific outputs;
• classify Imposition Layouts for Books and Flat Sheet Layouts;
• prepare proper formatted imposition templates in page layout and imposition program;
• construct organized file tree maintaining links and the correct file version for output;
• modify Output Device dependent PDF settings to achieve predictable results; and
• demonstrate the ability to digitally capture scanned images properly sized and formatted for placement in a page layout document.

GA 242 - Digital Imaging II

• understand the basics of both additive and subtractive color;
• understand the processes of color correction and color separation, and their relation to quality of print production;
• receive an introduction to the color separation techniques of gray component replacement (GCR) and under color removal (UCR);
• scan and prepare color images correctly for postscript output; and
• output 4 color process plates to a platesetter and perform basic quality control, such as checking line screens, angles, ink density and overall plates quality.